• WSP Series off-circuit round/disc form tap-change
WSP Series off-circuit round/disc form tap-change
discuss personally
Model
WSPⅡ1 250/35-6x5
WSPⅡ1 125/35-6x5
WSPⅡ1 63/35-6x5
WSPⅡ1 250/35-4x3
WSPⅡ1 125/35-4x3
WSPⅡ1 63/35-4x3
WSPⅡ1 250/20-6x5
WSPⅡ1 125/20-6x5
WSPⅡ1 63/20-6x5
WSPⅡ1 250/20-4x3
WSPⅡ1 125/20-4x3
WSPⅡ1 63/20-4x3
WSPⅡ1 250/10-6x5
WSPⅡ1 125/10-6x5
WSPⅡ1 63/10-6x5
WSPⅡ1 250/10-4x3
WSPⅡ1 125/10-4x3
WSPⅡ1 63/10-4x3
WSPⅢ1 125/35-5x5
WSPⅢ1 63/35-5x5
WSPⅢ1 125/35-3x3
WSPⅢ1 63/35-3x3
WSPⅢ1 125/20-5x5
WSPⅢ1 63/20-5x5
WSPⅢ1 125/20-3x3
WSPⅢ1 63/20-3x3
WSPⅢ1 250/10-5x5
WSPⅢ1 125/10-5x5
WSPⅢ1 63/10-5x5
WSPⅢ1 250/10-3×3
WSPⅢ1 125/10-3×3
WSPⅢ1 63/10-3×3
Basic info
Brand Transformer Parts
Model NO. WSP Series off-circuit round/disc form tap-change
Rated voltage 35kV
Rated normal current 250A
Methods of regulation Central voltage regulation
number of taps 6
number of position 5
Series WSP Series
Product Detail

Overview

This series of tapping switches are applied to the oil immersed transformer with frequency 50HZ、60Hz, rated voltage 10KV~35KV,rated current 63A~250A, Before changing the voltage, must cut of the power of the transformer, changed the turns of coil under off-circuit condition so as to realize the purpose of adjusting the voltage of the transformer; finally reach the purpose to adjust the secondary output voltage.

Changing the tapping position by such way: rotate the handle to drive the shaft, then the shaft drive the moving contactors. Thereby changing the transformer primary windingturns in order to change the transformer voltage and adjust the secondary voltage.

outline

If you need to know about more product; welcome contact us.→→→

 

Know your supplier
Transformer Parts
As a key component in power systems, the stable operation of transformers relies on high-quality accessories. Wone specializes in the sales and supply of transformer accessories, delivering high-quality products and fast response services through an efficient and professional supply chain system. Core Strengths Comprehensive Product Range: Includes insulation materials, cooling components, protection devices, and various structural parts to meet diverse needs. Global Supply Chain Network: Integrates high-quality supplier resources to ensure product stability and reliable delivery schedules. Smart Logistics Management: Utilizes information systems for full-process tracking, improving delivery efficiency and transparency. Professional Technical Support: Offers product selection advice, application consulting, and after-sales maintenance to ensure smooth project execution. Commitment to Sustainability: Prioritizes eco-friendly materials and energy-efficient products, fulfilling corporate social responsibility. Wone is committed to building an efficient, reliable, and sustainable supply chain for transformer accessories, supporting the stable development of the power industry.
Main Categories
Electrical fittings
Business Type
Design/Sales
Highest Annual Export (USD)
$300000000
Professional Experience
1 years
Workplace
1000m²
占位
占位
Documents
Restricted.
WSP Series off-circuit round/disc form tap-change manual
Manual English
Consulting
Related Products
Related Knowledges
How is the contradiction between the small grounding residual current and the neutral point displacement voltage exceeding the standard resolved?
How is the contradiction between the small grounding residual current and the neutral point displacement voltage exceeding the standard resolved?
Contradiction PointsIn automatic tracking arc suppression coils, the adjustment precision is high, the residual current is small, and the operation is close to the resonance point.In an automatic tracking arc suppression coil grounding system, two factors must be considered: Under normal operating conditions, the long-term voltage displacement of the neutral point should not exceed 15% of the system's nominal phase voltage; In the case of a ground fault, the grounding residual current should be
Edwiin
07/28/2025
Power Supply Design of the Group Testing Device for Special Transformers in Electrified Railways
Power Supply Design of the Group Testing Device for Special Transformers in Electrified Railways
1 Hardware Design of Tester Power SupplyThis device uses a standard small - signal generating device to generate small - current signals with the required frequency and phase angle. Then, through the amplifying circuit and phase - modulating circuit, the working power supply is generated.1.1 Power Frequency Sine Wave Small - Current Signal Generating DeviceThe sine wave generating circuit is mainly composed of the waveform generating chip MAX038 produced by MAXIM Corporation of the United States
Ron
07/28/2025
Analysis of Testing Methods for Turns Ratio and Connection Mode of Special Transformers
Analysis of Testing Methods for Turns Ratio and Connection Mode of Special Transformers
1 Error Analysis of Traditional Turn Ratio Testing MethodsThe QJ35 turn ratio bridge and other single-phase-phase-based testers all use the double-voltmeter principle. The QJ35, however, eliminates power supply fluctuation interference via bridge balance. For three-phase transformer ratio testing with a single power supply, corresponding terminals must be shorted and data converted, turning three-phase tests into independent single-phase measurements, with √3 Yd conversion based on connect
Felix Spark
07/28/2025
What are the production processes of special transformers?
What are the production processes of special transformers?
A certain special transformer manufacturing enterprise, which has been producing special transformers such as split - phase - shifting rectifier transformers, rectifier transformers for electrolysis, and transformers for submerged arc furnaces for more than 20 years. Now, an evaluation is made on the production process flow and its characteristics of the special transformers after the company's transformation.1.Production Process Flow Chart of Special TransformersThe production of special transf
Leon
07/28/2025
Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil
Cost Differences and Performance Comparison of 35kV New Energy Transformers Based on Dry-Type, Mineral Oil, and Vegetable Oil
For users, when purchasing a 35kV new energy transformer, choosing between dry-type, mineral oil-filled, or vegetable oil-filled types involves multiple considerations. These include user habits, maintenance-free performance, safety and fire resistance, volume and weight, among others. However, cost differences are undoubtedly one of the most crucial factors.To illustrate the issue intuitively, this paper selects a three-level energy efficiency dual-winding new energy transformer with a rated ca
Ron
07/26/2025
What is the connection group of a transformer?
What is the connection group of a transformer?
Transformer Connection GroupThe connection group of a transformer refers to the phase difference between the primary and secondary voltages or currents. It is determined by the winding directions of the primary and secondary coils, the labeling of their start and end terminals, and the connection mode. Expressed in a clock-like format, there are 12 groups in total, numbered from 0 to 11.The DC method is commonly used to measure the transformer's connection group, mainly to verify whether the con
Vziman
07/26/2025
×
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!